Control 4 Door Station - Interior Einstellungsanleitung PDF herunterladen (Seite 8)

Figure 9. 26cm Antenna Kit

Figure 10. 3m Antenna Kit

WiFi Antenna Kit Installation (Optional)

Before you install the antenna:

1 Make sure the Door Station is assembled.

2 Make sure the Door Station back box is installed

in the wall. See the Door Station Back Box

Installation Guide for details.

Antenna Kit—WiFi/ZigBee 2.4GHz, 26cm

(C4-AK-26cm)

1 Remove the antenna from its packaging.

2 Attach the antenna’s plug to the RSMA connector

on the Door Station (see Figure 11).

Figure 11. Antenna to RSMA Connector

3 Thread the other end of the antenna through the

back wall of the back box (see Figure 12).

Figure 12. Thread Antenna Through Back Box

4 Leave the other end of the antenna hanging

outside the back box. Adjust it vertically for the

best signal.

5 Carefully insert the Door Station into the back box

(see “Attach the Door Station”).

Antenna Kit— WiFi/ZigBee 2.4GHz, 3m (C4-AK-3M)

1 Attach the antenna’s plug to the RSMA connector

on the Door Station (see Figure 11).

RSMA Connector

Antenna

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Control 4 Door Station - Interior Einstellungsanleitung Seite 8